Macchine usate: Macchine per la lavorazione della plastica

Installation height min.: 770mm, max. stroke: 100mm, max. locking force: 210kN, max. mold mass lower part: 2000kg, max. mold mass upper part: 1500kg, mass of clamping unit: 4500kg, control: Siemens ...

This HAITIAN MA-4700 injection moulding machine was manufactured in 2011. It offers an injection capacity of 1860 grams and a powerful injection pressure of 1850 Bar. The clamping force can reach up ...

This ENGEL e-victory 740H/50W/220 combi + Viper 20 injection moulding machine was manufactured in 2016. It features dual injection units with maximum injection rates of 279.45 cm³/s and 103.67 cm³/s ...

This SANDRETTO HES 3500 injection moulding machine was built in the year 2010.

This SUMITOMO SHI DEMAG 1300-8000 injection moulding machine was made in 2010. The machine has a clamping force of 13000 kN and a screw diameter of 110 mm. It Includes a robot MASTER MATTIC ...

This KRAUSS MAFFEI 50-180CX Injection moulding machine was manufactured in the year 2013 in Germany. The machine has a clamping force of 500 kN.
General Data
Measurements width: 4000 mm

This Husky H225 RS 55/50 Injection Moulding Machine was manufactured in the year 2013 in China and has 62435 hours. The machine has a closing force of 2250 kN and a screw diameter of 50 mm.

This Husky H225 RS 45/38 Injection Moulding Machine was made in the year 2013 in China and has 54744 hours. The machine has a clamping force of 2250 kN and a screw diameter of 38 mm.
Injection ...

This Husky H300 RS 55/50 Injection Moulding Machine was built in the year 2013 in China and has 62707 hours. The machine has a closing force of 3000 kN and a screw diameter of 50 mm.
Injection ...

This Tederic DE360 Injection moulding machine was manufactured in the year 2018. It is equipped with a TEDERIC KEBA 2880 control unit. The machine has a conveyor belt of 3000 x 600 mm.
Control ...

This Netstal SynErgy 1750-460 Injection moulding machine was made in 2001 in Switzerland. It is equipped with a Netstal control unit. The machine has a clamping force of 1750 kN.
Control Unit

This Boy 55M Injection moulding machine was made in 2004 in Germany and has 113.279 hours. The machine has a clamping force of 550 kN.
General Data
Measurements width: 2700 mm

This Netstal SynErgy 1500-460 Injection moulding machine was manufactured in the year 2003 in Switzerland. It is controlled by a Netstal control unit. The machine has a clamping force of 1500 kN.

This Battenfeld HM 13000/9200/7700 Injection moulding machine was made in 2004 in Germany and has 67871 hours. The machine has a clamping force of 13000 kN and a screw diameter of 120 mm.

This FERROMATIK Magna T (MTs) - 275 Injection Moulding Machine was made in the year 2018. It has a clamping force of 2750 kN and a column spacing of 660 x 660 mm. Max. plate distance is 1560 mm and ...

This ENGEL e-motion 2440/380 T Injection moulding machine was manufactured in the year 2015 in Austria and has 53893 production hours. It is controlled by an ENGEL CC300 control unit. The machine has ...

This FERROMATIK Europe Elektra 300 Injection moulding machine was made in the year 2009 in Germany and has 58222 production hours. It is equipped with a Ferromatik-Multi-Mikroprozessor control unit. ...

This Arburg ALLROUNDER 1200 t 1000 - 400 Injection moulding machine was manufactured in the year 2018 in Germany. It has 58 production hours. The machine has a clamping force of 1000 kN, machine like ...

This Battenfeld BA 3500/1900 BK injection moulding machine was built in the year 2000. It is equipped with a Unilog 4000 control unit. The machine has a clamping force of 3500 kN. See video gallery ...

This Krauss Maffei PX 121-540 injection moulding machine was made in the year 2017. It is equipped with a Krauss Maffei MC6 control unit. The machine has a clamping force of 1200 kN and screw diameter ...

This Krauss Maffei KM 280-1400 C3 injection moulding machine was made in the year 2003 in Germany and has 60000 hours. The machine has a clamping fore of 2800 kN and an injection pressure of 2380 ...

This ENGEL insert 60V-35 single XS ecodrive Injection moulding machine was manufactured in the year 2019 in Austria and has 11781 production hours. It is equipped with an Engel CC300 control unit. The ...

This ENGEL insert 60V-35 single XS ecodrive Injection moulding machine was manufactured in the year 2017 in Austria and has 12750 production hours. It is equipped with an Engel CC300 control unit. The ...

This Klockner DESMA 968.250 ZO Injection moulding machine was manufactured in the year 2010 in Germany and has 27676 production hours. It is equipped with a DESMA DRC 2010 control unit. The machine ...

This Sumitomo Demag Systec 1300 1500-9500 Servo Injection moulding machine was manufactured in the year 2019 and has 17522 production hours, of which 3695 are heating hours.
Control Unit

This Engel ES 650/150 HL Injection moulding machine was manufactured in the year 2001 and has 17798 hours. It is equipped with an Engel EC 100 control unit. The machine has a clamping force of 2000 kN ...

This Boy 55 M Injection moulding machine was manufactured in the year 2010 in Germany and has 5532 production hours. It is equipped with a Procan MD control unit. 4 units are available.
Control ...

This DEMAG Ergotech 150-610 Compact Injection Moulding Machine was built in the year 1998 and has 13860 pump hours. It is equipped with a Demag NC IV control unit. The machine has a clamping force of ...

This ARBURG 320 C 500-100 + Multilift H with B-Axis Injection moulding machine was manufactured in 2003 in Germany. It has a clamping force of 500 kN and a screw diameter of 30 mm. The distance ...

This FOSTAG 64fold injection mold for injection moulding machine was built in the year 2003 in Switzerland.

Machine Benefits
Qualitative Machine Benefits:
- 2019 equipped ...

This HTW PCO 1810 injection mold for injection moulding machine was manufactured in the year 2018.
Control Unit
Brand: Gammaflux


Machine Benefits
Technical ...

This FERROMATIK Milacron K-Tec 85 Injection moulding machine was manufactured in the year 2006. The machine has a clamping force of 850 kN and a screw diameter of 25 mm.
General Data

This BMB Ekw 70pi Hybrid Injection moulding machine was manufactured in the year 2015. It is equipped with a HEIDENHAIN control unit. The machine has a clamping force of 7000 kN and a screw diameter ...

This DEMAG ERGOTECH 4200-2300 Injection Moulding Machine was built in the year 1995 and has 25000 production hours. It is equipped with a Wittmann handling. The machine has a clamping force of 4200 kN ...

This Battenfeld EcoPower180 Injection moulding machine was manufactured in the year 2012 and has less than 500 hours. It is equipped with a Battenfeld Unilog B6 control unit.
Control Unit

This ARBURG ALLROUNDER CENTEX 520 C 2000-675 Injection moulding machine was manufactured in 1998 in Germany. It has a clamping force of 2000 kN, an opening stroke of 650 mm and is equipped with an ...

This ARBURG ALLROUNDER CENTEX 470 C 1500-800 Injection moulding machine was manufactured in 2007 in Germany. It has a clamping force of 1500 kN, an opening stroke of 650mm and is equipped with an ...

This Arburg 370 S 600-290 U Injection moulding machine was manufactured in the year 2022 in Germany. It is new, never used and still in original packaging. With a clamping force of 600 kN, 290 ...

This Battenfeld HM 2P 800-7700 Injection moulding machine was manufactured in 2003. This machine has an injection unit with a screw diameter of 120mm, specific injection pressure of 1361 bar, and a ...

This Arburg Multilift H 720 - 3200 - 1300 Injection moulding machine was manufactured in the year 2005 in Poland and has 42878 production hours. It is equipped with an Arburg Selogica control unit. ...

This Ferromatik Milacron ELEKTRA evolution / EE 30 Injection moulding machine was made in 2003 in Germany. It has a clamping force of 300 kN and a screw diameter of 18 mm. Operation hours are at ...

This Ferromatik Milacron K-TEC 200 S Injection moulding machine was made in 2007 in Germany. It has a clamping force of 2000 kN and a screw diameter of 40 mm. The operating hours are at 65545h.

This Ferromatik Milacron EE 75 Injection moulding machine was made in 2003 in Germany. It has a clamping force of 750 kN and a screw diameter of 30 mm. The operating hours are at 96694h.
General ...

This ENGEL ES 500/110 HL Injection moulding machine was manufactured in the year 2001 in Austria. The machine has a clamping force of 1100 kN and screw diameter 40mm. It comes with a linear robot ...

This ENGEL ES 500/110 HL Injection moulding machine was manufactured in the year 2002 in Austria. The machine has a clamping force of 1100 kN and screw diameter 40mm. Production hours are at 94904.

This Krauss-Maffei 160-380 CX Injection moulding machine was manufactured in the year 2016 in Germany. It is equipped with a clamping force of 1600 kN, a SP 380 injection unit with a screw diameter of ...

This Krauss-Maffei 150-700 C2 Injection moulding machine was manufactured in the year 2003 in Germany. It is equipped with a clamping force of 1500 kN, a SP 700 injection unit with a screw diameter of ...

This KRAUSS MAFFEI KM 65/80 CX Injection moulding machine was manufactured in 2010 in Germany. This machine is equipped with a hydraulic clamping unit with a clamping force of 650 kN. It has a tie bar ...

This Arburg Allrounder 320 KS 700-100 Injection moulding machine was manufactured in the year 2001 in Germany and has 3467 production hours. It is equipped with an Arburg Selogica control unit.

This DEMAG Concept 420/810-2300 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with a Ergo control unit. The machine has a screw diameter of 60 mm, a stroke ...