Macchine sbavatrici – Sheet Metal Deburring Machine GECAM G 135 RX

Posizione dell'oggetto

Fabbricante

descrizione

neu
ca. 12 - 14 Wochen ab Auf
Italien
74000 ?
1487.4 ?
1350 mm
0,5 - 170 mm
1370 x 2200 mm
4000 m? / h
200 mm
6 bar
78 (+ / -2) dB
1750 mm
2100 mm
2180 mm
2000 kg
WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP
Machine made of stress-free welded steel construction for stable and rigid structure.
Work table with motorised height adjustment via 4 synchronised spindles.
Independent drive motors for each work group.
Bonnets for extraction inside the machine, one per station.
Touch screen for
-Automatic star-delta connection of the main motors
- Analogue ammeter for each group
- Digital display for sheet thickness with decimal point tolerance
- Material thickness adjustment (+ / - 0.1 mm)
- Machine condition monitoring with alarm messages
FEEDING SYSTEM
Robust steel structure, wear-resistant surface.
Vacuum conveyor belt on request
Variable feed speed via frequency converter 0.6 to 6.5 m / min.
Rubber conveyor belt, oil and temperature resistant
Automatic conveyor belt centring
Lateral guides to prevent the belt from lifting off.
Rubber pressure rollers in front and behind each station, oil and temperature resistant
Idle rollers at the front and rear table
1 . WORKING GROUP - R
Balanced contact roller Anti-oil and anti-heat Nitrile rubber coating
Adjustable via eccentric shaft for working position and compensation of abrasive belt wear
Pneumatic cylinder for automatic feed to working position and for lifting in case of emergency stop.
Abrasive belts and / or Scotch Brite can be used.
Motorised adjustment and electronic control of contact roll height.
Variable speed motor with automatic brake in case of emergency.
Pneumatic tensioning system for the abrasive belt.
Sanding belt centring system, with electronic photocell.
Oscillation adjustment in width and time.
Diameter of contact roller
mm
180
Hardness of the rubber wheels
Shore
55
Stroke of the contact roller adjustment up-down +quot;Grain adjustment
mm
8
Positioning accuracy of the contact roller adjustment
mm
+ / - 0,02
Positioning speed of the contact roller adjustment
m / s
10
Grinding belt speed
m / s
3-18
Motor power
kW
7,5
2. WORKING GROUP - X
2 rows of vertical brushes, 10rotating clockwise and 10counterclockwise.
Transverse movement of the entire group (oscillating)
Quick change holder for brushes
Brush diameter
mm
115
Number of brushes
No
20
Oscillation stroke
mm
15
Rotation motor power
kW
5,5
Revs
1 / min
1000
Oscillation motor power
kW
0,37
Grinding brush speed
m / s
10,0
ACCESSORIES:
B Group - External barrel brush ? 150 mm
with Scotch Brite Brush
?
5.580,00
with Wire Brush 0,3 mm
?
5.900,00
R GROUP - GRINDING BELT
Motor 15 kW
?
1.060,00
Motor with 2 speeds 9 - 11 kW
?
1.830,00
Motor with 2 speeds 12 - 15 kW
?
2.360,00
X GROUP - CUP BRUSHES
Motor with variable speed 5,5 kW 350 / 1100
?
4.190,00
OPTIONS:
Return to Sender System (Grinding part is discharged to the front again)
?
1.290,00
Conveyor belt with vacuum system - 3,0 kW - 300 mm wide
?
4.780,00
2 additional PVC coated rollers on infeed and outfeed side
?
2.040,00
Tampico Brush System for parts cleaning 0,55kW ? 150 mm
?
4.510,00
Tampico Brush system for conveyor belt cleaning ? 150 mm
?
4.030,00
magnetic conveying system - 2 groups, 200 x 200 mm
?
13.520,00
Demagnetiser
?
4.940,00
THE MACHINE MUST BE USED WITH AN EXTRACTION DEVICE. WE RECOMMEND AN EXTRACTION SYSTEM WITH 4,000 M? / H.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stato

Macchina sull'elettricità